Research indicates that many customers wait reliability and dry compressed air at an affordable price. No fancy bells and whistles-just dry air, pure and simple. The HRB series non-cycling dyes were designed to meet these demands.
• Worldwide-patented oracle
• No maintain required
• Excellent quiet operation
• Lowest operating cost
• Air-to-refrigerant reheating system
• No condensate on outlet pipe
Model |
Flow Capacity |
Unit (kW) |
Power |
Inlet / Outlet |
Weight |
Dimension(mm) |
Refrigerants |
||
H |
W |
D |
|||||||
HRB 0.5 |
0.50 |
0.24 |
220 ~ 240V |
3/8” |
20 |
382 |
320 |
320 |
R-134a |
HRB 1.0 |
1.00 |
0.34 |
3/4” |
32 |
568 |
368 |
394 |
||
HRB 1.3 |
1.33 |
0.42 |
3/4” |
32 |
568 |
368 |
394 |
||
HRB 1.6 |
1.67 |
0.58 |
3/4” |
44 |
568 |
500 |
500 |
The HRA series, built-in with our highly advance stainless steel plate heat exchanger, deters refrigeration bad with great efficiency of heat-exchanging. Saving in electrical power and convenient in maintenance are its unique feature.
• No rust water and corrosion
• One-Pass structure = Heat exchanger and reheater
• Power-on LED, Compessor-on LED, On / Off rocker switch and dew point bar graph LED display
• Providing long term corrosion resistance
• Dyer run, autodrain valve on, Fan motor on, Alarm
• Inlet, Ambient / Cooling water, Chiller inlet & discharge refrigerant temperatures, Discharger refrigerant temperatures.
Saturated incoming compressed air is quickly chilled in the air-to-air heat exchanger by the cold compressed air as it exits the air-to-refrigerant (evaporator). Here, the cold dry air is reheated to prevent pipeline sweating and reduce compressor energy before exiting the dryer. In the evaporator, the air temperature is reduced to that of the cold refrigerant. A moisture separator lowers the velocity and mechanically separates the condensate from the air stream. An automatic drain removes the condensate. The air-to-air heat exchanger re-heats the air and clean, dry compressed air exits the dryer.
Model |
Flow Capacity |
Unit (kW) |
Power |
Inlet / Outlet |
Weight |
Dimension(mm) |
Refrigerants |
||
H |
W |
D |
|||||||
HRA 24.0 |
24.06 |
4.5 |
380 – 420 V |
3” |
385 |
1470 |
750 |
1400 |
R-407C |
HRA 31.4 |
31.48 |
6.1 |
4” |
400 |
1470 |
750 |
1400 |
||
HRA 37.5 |
37.52 |
7.6 |
4” |
440 |
1470 |
750 |
1400 |
||
HRA 45.1 |
45.10 |
8.6 |
4” |
850 |
1582 |
860 |
1600 |
||
HRA 60.0 |
60.00 |
9.5 |
6” |
1000 |
1628 |
1050 |
1800 |
||
HRA 75.0 |
75.00 |
10.3 |
6” |
1050 |
1628 |
1050 |
1800 |
||
HRA 90.1 |
90.10 |
11.8 |
6” |
1100 |
1628 |
1050 |
1800 |
||
HRA 120.0 |
120.00 |
15.1 |
8” |
2000 |
2320 |
1500 |
2850 |
||
HRA 150.1 |
150.10 |
20.8 |
8” |
2300 |
2320 |
1500 |
2850 |
||
HRA 180.3 |
180.30 |
25.7 |
8” |
2500 |
2320 |
1500 |
2850 |
||
HRA 240.1 |
240.10 |
38.5 |
8” |
3500 |
2320 |
1500 |
3800 |
||
HRA 300.3 |
300.30 |
46.6 |
10” |
4800 |
2400 |
1600 |
4800 |
||
HRA 360.3 |
360.30 |
52.7 |
10” |
5000 |
2400 |
1600 |
4800 |
barG |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
Factor |
0.87 |
0.92 |
0.96 |
1.00 |
1.03 |
1.07 |
1.10 |
1.12 |
1.14 |
°C |
30 |
35 |
40 |
45 |
49 |
Factor |
1.22 |
1.00 |
0.84 |
0.71 |
0.60 |
°C |
20 |
25 |
30 |
35 |
40 |
43 |
Factor |
1.06 |
1.00 |
0.92 |
0.85 |
0.78 |
0.72 |
Hz |
50 |
60 |
Factor |
1.00 |
1.20 |
The FLEX series are optimized air dyers for hot and humid climate in the tropical regions. An advanced stainless steel brazed plate heat exchanger is applied, and it deters refrigeration load with great efficiency of heat-transfer. The innovative and simplified refrigeration circuit provides reliable operation, low operating cod and versatile installation.
Optimized for hot and humid climate in the tropical regions
Stainless steel brazed plate heat exchanges optimize heat transfer and service life
Separator, re-heater and evaporator combined into 1 compact efficiency unit
Improved ventilation by up-flow coding air design
Low pressure drop reduces operating costs
Low power consumption
Easy to install package saves time and money
Environmentally friendly R -134a & R-407C refrigerants
Model |
Flow Capacity |
Unit (kW) |
Power |
Inlet / Outlet |
Weight |
Dimension(mm) |
Refrigerants |
||
H |
W |
D |
|||||||
HLX 2.4 |
24.1 |
0.52 |
220 ~ 240V |
1” |
50 |
641 |
363 |
881 |
R-134a |
HLX 3.1 |
3.11 |
0.59 |
1” |
52 |
641 |
363 |
881 |
||
HLX 4.2 |
4.25 |
0.71 |
2” |
67 |
761 |
443 |
931 |
R-407C |
|
HLX 6.8 |
6.80 |
1.36 |
2” |
77 |
761 |
443 |
1031 |
||
HLX 10.4 |
10.48 |
2.00 |
2” |
97 |
811 |
493 |
1111 |
||
HLX 12.7 |
12.74 |
2.38 |
2” |
100 |
811 |
493 |
1111 |
||
HLX 15.0 |
15.00 |
2.66 |
2” |
128 |
811 |
553 |
1211 |
||
HLX 22.6 |
22.64 |
5.80 |
FLG 3” |
285 |
1572 |
724 |
1154 |
||
HLX 35.3 |
35.38 |
7.30 |
380V 50Hz |
FLG 4” |
340 |
1572 |
724 |
1204 |
|
HLX 42.4 |
42.47 |
7.10 |
FLG 4” |
400 |
1572 |
804 |
1254 |
|